Skip to main content
Epson · Printer Misaligned Output · Nepean Sea Road

Epson Printer
Misaligned Output
in Nepean Sea Road

Expert diagnosis & repair for Printer Misaligned Output on your Epson device in Nepean Sea Road. Free doorstep pickup, genuine parts & 90-day warranty.

✓ ₹350 Inspection (refunded if you proceed with repair) ✓ Free Doorstep Pickup ✓ Same-Day Repair ✓ 90-Day Warranty ✓ All Epson Models

Open 9 AM – 9 PM · 7 days · ₹350 inspection fee (refunded if you proceed with repair)

Symptom Checker

Is Your Epson Device Showing These Signs?

Common symptoms of Printer Misaligned Output on Epson devices. Recognise 2 or more? Book a ₹350 inspection (refunded if you proceed with repair) now.

Laptop clearly shows signs of Printer Misaligned Output

Normal laptop performance significantly impacted

Issue worsening progressively with continued use

Standard user troubleshooting has not resolved it

Laptop has become unreliable for daily work

Risk of further hardware damage if left unaddressed

Don't Delay — Printer Misaligned Output Gets Worse Over Time

Unaddressed hardware issues worsen and can lead to secondary damage, escalating repair costs significantly.

Book Inspection (₹350)
Root Cause Analysis

Why Does Printer Misaligned Output Happen on Epson Devices?

Knowing the root cause ensures a precise repair — not just a temporary fix.

Physical Damage

Accidental drops, pressure or impact causing mechanical damage to internal components.

Liquid Exposure

Water, beverages or humidity causing short circuits or corrosion on circuit boards.

Normal Wear & Tear

Components degrade naturally with regular use — batteries, connectors and hinges most affected.

Manufacturing Defect

Factory faults that surface after the warranty period in certain production batches.

What Will It Cost to Fix?

Repair cost for Epson Printer Misaligned Output in Nepean Sea Road depends on model and severity. We provide a free written estimate — no obligation.

Why Us?

Why Choose Xigox for Epson Printer Misaligned Output in Nepean Sea Road?

With 1,00,106+ successful repairs and a 4.9-star rating, Xigox is an independent Epson repair specialist serving Nepean Sea Road. Covering the entire Mumbai City district with same-day service.

Transparent Pricing

₹350 inspection fee (refunded if you proceed). Written quote before any Epson Printer Misaligned Output work begins.

No Fix, No Repair Fee

If we cannot resolve your Epson Printer Misaligned Output issue, you pay nothing beyond the inspection fee.

Component-Level Repairs

We repair Epson hardware at chip and board level where it's safe to do so — often a fraction of a full-module swap.

Experienced Technicians

Our engineers work on Epson hardware regularly. Every repair is tested before return.

Genuine & OEM-Grade Parts

We use genuine Epson parts wherever available; otherwise OEM-compatible components.

90-Day Parts Warranty

Every repair backed by a written 90-day warranty. Same fault recurs? We fix it free of charge.

Repairs Completed
1,00,106+
Since 2011
Average Rating
4.9 ★
9,727+ reviews
Repair Warranty
90 Days
Parts & labour
Avg Response
30 Min
For common issues
Pickup & Drop
Free
₹350 inspection fee
Est. Since
2011
15+ yrs in Mumbai City

Who repairs your device

Repaired in-house by Xigox technicians

Your Epson is handled by Xigox technicians from start to finish. It is never handed on to another shop. Work that needs the repair bench is done at our workshop in Virar West.

Board-level faults are traced with a microscope, a multimeter and a soldering station before any part is replaced, and parts are fitted only after you approve the quote.

We don't open your personal files during a repair. When a job needs access to your data, such as data recovery or a Windows reinstall, we ask you first.

  • Repaired in-house, not outsourced
  • Quote approved by you before work starts
  • Your files stay private
  • Microscope and board-level tools
  • Genuine or OEM-grade parts
  • 90-day warranty on repairs
Technician inspecting a laptop motherboard under a microscope at the repair bench Technician testing a laptop mainboard with a multimeter beside a Xigox-branded monitor Technician brushing dust off an opened laptop motherboard with a cleaning brush Technician inspecting a laptop motherboard under a microscope at the repair bench
Xigox technicians at the repair bench.
Our Process

How We Fix Epson Printer Misaligned Output

Step-by-step from booking to delivery — complete transparency, no surprises

Tell Us the Problem

Call, WhatsApp or book online. Tell us about the Printer Misaligned Output on your Epson printer in Nepean Sea Road. No technical expertise needed.

Free Pickup & Drop

We pick up your Epson printer from your Nepean Sea Road address at no transport cost. Bring it to us or we come to you.

₹350 Inspection

A Epson specialist examines your printer and identifies the exact root cause of the Printer Misaligned Output. Full written report provided — ₹350 fee refunded if you proceed with repair.

Transparent Quote

We share a detailed repair quote. Work begins only after your explicit approval — no hidden charges, no surprises.

Professional Repair

Our engineers fix the Printer Misaligned Output using OEM-grade Epson parts. A 12-point quality checklist is completed before your printer is returned.

90-Day Warranty + Delivery

Your Epson printer is returned to your Nepean Sea Road address with a written 90-day warranty. Same fault recurs? We fix it free of charge.

Customer reviews

What Customers Say About Laptop & Computer Repairs in Nepean Sea Road

4.9/5 · 7 reviews shown

See all 9,727+ reviews

Epson L5190 — Laser Printer Fix

“Our Epson L5190 laser printer had grey background shadows on every page. Xigox Churchgate replaced the drum unit and transfer roller. Prints are now sharp and clean with crisp text on pure white backgrounds.”
S Sanjay Deshmukh Nepean Sea Road · 20 Mar 2024 39

Epson L3210 — Printer Not Responding Fix

“Our Epson L3210 showed online but refused to print anything. Xigox Churchgate found a corrupted spooler and faulty communication board. Fixed both and updated firmware. Prints instantly now at full rated speed.”
R Raj Malhotra Nepean Sea Road · 8 Sep 2024 15

Brother MFC-L2701DW — Blank Pages Fix

“Our Brother MFC-L2701DW was feeding paper but printing blank pages only. Xigox Churchgate diagnosed a disconnected print head cable and reseated it properly. Full printing restored immediately. Quick diagnosis saved our deadline.”
H Harsh Agarwal Nepean Sea Road · 29 Oct 2025 20

Brother DCP-T720DW — Network Printer Setup

“Needed our Brother DCP-T720DW configured as a shared network printer for our twenty-person office. Xigox Churchgate set up static IP, SNMP monitoring, and driver deployment. Everyone can print seamlessly now. Professional IT-level setup.”
P Prarthana Behere Nepean Sea Road · 8 Aug 2024 27

Canon MAXIFY GX6070 — General Printer Repair

“Our office Canon MAXIFY GX6070 was producing faded prints with streaks. Xigox Churchgate technician replaced the worn rollers and fuser element. Print quality is now factory-perfect. Sharp text and vibrant colours. Excellent on-site service.”
S Sunil Kelkar Nepean Sea Road · 28 Feb 2026 36

HP Smart Tank 515 — Blank Pages Fix

“Our HP Smart Tank 515 was feeding paper but printing blank pages only. Xigox Churchgate diagnosed a disconnected print head cable and reseated it properly. Full printing restored immediately. Quick diagnosis saved our deadline.”
K Ketaki Mategaonkar Nepean Sea Road · 10 May 2025 3
Page 1 / 2

← Swipe or tap dots to browse →

Repair examples

Recently Repaired Printers

View All Recent Repairs

Canon

PIXMA G620

Fixed
Issue
Color prints showing streaks, missing cyan. Nozzle blocked.
Solution
Deep chemical cleaning of print head. Restored all color channels.
Bandra East 1 Hours
  • Inkjet
  • Canon
  • Head Clean

HP

LaserJet M428fdw

Fixed
Issue
Scanner producing black lines across scanned documents. ADF feeding but scanner output corrupted.
Solution
Replaced cracked ADF scanner glass strip. Cleaned flatbed scanner glass and calibration strip. Tested scan-to-email and copy functions.

Technician's note

Hairline crack in CIS scanner glass invisible to naked eye but caused consistent vertical line artifact.

Vikhroli East 1.5 Hours
  • HP
  • MFP
  • Scanner

Epson

L805

Fixed
Issue
Photo prints showing incorrect colors — skin tones appearing greenish. Color banding visible in gradient areas.
Solution
Performed nozzle check and deep cleaning. Ran ICM color profile calibration. Aligned print head for optimal dot placement.

Technician's note

Light cyan channel was partially blocked. After 3 cleaning cycles and manual alignment, color accuracy restored to factory spec.

Dadar West 2.5 Hours
  • Epson
  • Photo Printer
  • Color Calibration

Canon

imageCLASS LBP226dw

Fixed
Issue
Printer showing "Toner Low" despite new toner cartridge installed. Print density extremely light.
Solution
Cleaned toner level sensor window inside printer. Reset toner counter. Replaced faulty toner sensor board.

Technician's note

Toner dust had coated the optical sensor, giving false low readings. Sensor board had corroded connector pin.

Goregaon East 2 Hours
  • Canon
  • Laser
  • Toner Sensor

Samsung

Xpress M2835DW

Fixed
Issue
Vertical black lines appearing on every printed page. Print quality deteriorating with ghost images visible.
Solution
Replaced worn imaging drum unit. Cleaned corona wire and transfer roller. Ran diagnostic print to confirm clean output.

Technician's note

Drum surface had scratches causing line defects. Drum at 150%% of rated life — impressive longevity.

Thane West 1.5 Hours
  • Samsung
  • Laser
  • Drum Replacement

HP

DeskJet 2723

Fixed
Issue
Showing "Cartridge Problem" error after installing new cartridges. Printer refusing to print. Orange error light blinking.
Solution
Cleaned cartridge contacts with isopropyl alcohol. Reseated cartridges with proper alignment. Updated printer firmware to recognize new cart...

Technician's note

Oxidation on carriage contacts was causing intermittent connection. Genuine HP cartridges verified.

Powai 30 Minutes
  • HP
  • Cartridge
  • DeskJet

FAQ

FAQs — Epson Printer Misaligned Output in Nepean Sea Road

Everything you need to know before booking your inspection

10 questions answered

That is what the ₹350 inspection is for. Symptoms overlap constantly — the same visible behaviour can come from three different components. We test rather than guess, then show you what we found before quoting. If the actual fault turns out to be something cheaper, the quote reflects that. Free pickup also available in Malabar Hill, Kemps Corner, Walkeshwar and surrounding areas.
Usually not for long. Left alone, most faults of this kind put stress on neighbouring components and turn a contained repair into a board-level one. If you cannot bring it in immediately, tell us the symptoms on WhatsApp and we will tell you honestly whether it can wait a few days or should be powered down now. We also serve Malabar Hill, Kemps Corner, Walkeshwar, so you can recommend us to neighbours too.
Yes — Xigox specialises in Epson Printer Misaligned Output across Nepean Sea Road. Our experienced technicians diagnose and fix the problem efficiently, using OEM-quality parts and backed by a 90-day warranty. Free doorstep pickup is available in Nepean Sea Road — call or WhatsApp +91 74997 61196. Trusted by customers throughout Mumbai City — rated 4.9★ across 9,727+ reviews.
Most Epson Printer Misaligned Output issues in Nepean Sea Road are resolved the same day — typically within 2–4 hours of pickup. We provide an accurate time estimate during the ₹350 inspection (refunded if you proceed with repair) so you're never left guessing. Customers across Nepean Sea Road (400006) enjoy priority same-day scheduling.
Common causes of Epson Printer Misaligned Output include physical impact, wear and tear, manufacturing defects, water damage, overheating, or software conflicts. Xigox technicians perform a thorough diagnosis to identify the root cause and fix it permanently rather than applying a temporary patch. Customers across Nepean Sea Road (400006) enjoy priority same-day scheduling.
Every repair at Xigox — including Epson Printer Misaligned Output fixes — is covered by a 90-day warranty. If the same problem recurs within 90 days, we repair it free of charge. Our warranty is provided in writing and applies to all repairs across Nepean Sea Road and Mumbai MMR. Our service covers the full 400006 postal area in Nepean Sea Road.
The cost to fix Epson Printer Misaligned Output in Nepean Sea Road varies by printer model and severity. Xigox charges ₹350 for inspection — refunded if you proceed with the repair. A transparent written quote before any work begins. You're never charged until you approve the repair — no hidden fees, ever. Customers across Nepean Sea Road (400006) enjoy priority same-day scheduling.
Xigox repairs Epson Printer Misaligned Output on HP, Canon, Epson, Brother, Samsung, Ricoh and Kyocera, and more. Our engineers are trained on brand-specific procedures and we stock genuine-grade parts for the most common models, so most repairs in Nepean Sea Road are completed the same day. Free pickup also available in Malabar Hill, Kemps Corner, Walkeshwar and surrounding areas.
It depends on the age and value of the printer. As a rule, if the repair costs less than a third of a comparable replacement and the rest of the hardware is healthy, repairing is worth it. After the inspection we tell you the honest repair cost and what a replacement would run, so the comparison is yours to make — we do not push a repair that is not worth doing. We also serve Malabar Hill, Kemps Corner, Walkeshwar, so you can recommend us to neighbours too.
No. For any printer that still powers on we take a full backup before touching the hardware, and for units that do not, we attempt recovery before repair. Your data is never accessed beyond what the repair requires, and nothing is copied off-site. Trusted by customers throughout Mumbai City — rated 4.9★ across 9,727+ reviews.

Still have questions?

Send us your question on WhatsApp or call — a technician will answer.

Epson Printer Repair in Nepean Sea Road — Xigox

If you are looking for Epson Printer repair in Nepean Sea Road that is not a brand service centre, this is it. Xigox has run an independent Epson bench since 2011, and our technicians work on Epson boards and firmware every day rather than treating them as an occasional job. More than 1,00,000 repairs and a 4.9-star average rating sit behind that.

Parts for Epson Printer models are held in stock rather than ordered after you book, so most repairs are not waiting on a supplier. Screens, batteries, keyboards, charging boards and flex cables are all OEM-grade. You approve a written estimate first, and the ₹350 inspection is credited back against the repair.

We actively serve the entire 400006 postal area within Mumbai City district, ensuring same-day response for every repair request. ₹350 inspection fee (refunded if you proceed with repair). Located near Carmichael Road, our service coverage extends across Nepean Sea Road and all surrounding localities. In addition to Nepean Sea Road, we also provide doorstep repairs and free pickup for lab work for customers in Malabar Hill, Kemps Corner, Walkeshwar and other nearby areas.

Straightforward Epson jobs — battery, keyboard, screen, SSD or RAM — are done at your address in Nepean Sea Road. Anything needing the microscope and hot-air station comes back to the lab, with free pickup and drop either way. We confirm within 15 minutes of booking and tell you honestly whether it is a same-day fix.

We back Epson work with a 90-day parts-and-labour warranty in writing, not just a verbal promise. If your Printer does come back with the same fault, we cover it. You keep a direct WhatsApp line to the team that did the work.

Service Hours

Monday – Sunday · 9 AM – 9 PM

Open on all public holidays

Service Area

Nepean Sea Road & surrounding Mumbai areas

Doorstep repairs + free pickup for lab work

Contact Us

+91 74997 61196

info@xigox.com

Our Guarantee

90-day warranty on all repairs

Free re-repair if same fault recurs

Product lines

Epson Series We Cover for Printer Misaligned Output repair in Nepean Sea Road

Xigox keeps Epson parts and service documentation for 2 Epson series, so Printer Misaligned Output repair on a EcoTank and WorkForce machine is handled by someone who has seen that chassis before. We regularly take in EcoTank and WorkForce units for Printer Misaligned Output repair in Nepean Sea Road. Specific Epson models on our current service list include Epson EcoTank ET-2800, Epson L1300, Epson L3210 and Epson L3250. If your Epson model is not listed, it is almost certainly still covered — send us the model number on the base sticker and we will confirm parts availability before you book.

  • EcoTank
  • WorkForce

Epson WorkForce

The Epson WorkForce WF-2860 is part of Epson's WorkForce line — Epson's business inkjet printer series, built for office document volume with business-oriented features (networking, higher-capacity paper trays).

Worth knowing for this repair: Business-oriented inkjet with networking support for shared office use.

Epson WorkForce WF-2860

Epson EcoTank

The Epson M2140 is part of Epson's M-series — Epson's monochrome ink-tank printer line, built specifically for high-volume black-and-white document printing.

Worth knowing for this repair: Monochrome-only, ink-tank-based — optimized specifically for high-volume text document printing rather than photos.

Epson M2140

Printer Misaligned Output Repair for All Epson Models in Nepean Sea Road

Select your specific Epson model for a more targeted diagnosis page

Printer Misaligned Output Repair for Other Brands in Nepean Sea Road

We fix Printer Misaligned Output across all major laptop and computer brands with the same quality and warranty

Areas, Roads & Landmarks We Cover in Nepean Sea Road

Free pickup & drop across all these neighbourhoods

Localities & neighbourhoods

  • Malabar Hill
  • Breach Candy

Roads & highways

  • Nepean Sea Road
  • Bhulabhai Desai Road
  • Carmichael Road

Landmarks & famous places

  • Hanging Gardens
  • Pherozeshah Mehta Park
  • Walkeshwar Temple (nearby)

Epson Printer Misaligned Output Repair — All Locations

Explore more services

More Repair & Tech Services Near Nepean Sea Road

Same technicians · Free pickup · 90-day warranty across all services.

₹350 Inspection (refunded if you proceed with repair) · 1,00,000+ Repairs · 4.9 ★ · 90-Day Warranty

Fix Your Epson Device's
Printer Misaligned Output Today

₹350 Inspection (refunded if you proceed with repair) · Expert repair for Printer Misaligned Output · 90-day warranty

Serving Nepean Sea Road and all of Mumbai MMR · Open 9 AM – 9 PM daily

Comparison

Xigox vs Other Epson Printer Misaligned Output Shops in Nepean Sea Road

What you get with Xigox in Nepean Sea Road, side by side.

FeatureXigoxOther shops
Experienced Technicians Trained & VerifiedVaries; ask who will work on the device
Genuine / OEM Parts OEM-Quality PartsVaries; ask which part will be fitted
90-Day Warranty Written CertificateVaries; ask for the warranty in writing
Diagnosis / Inspection ₹350, credited to the repairVaries; ask what the diagnosis costs
Same-Day Turnaround Nepean Sea Road — Most RepairsVaries; ask for a time in writing
Free Doorstep Pickup Nepean Sea Road — FreeVaries; ask whether pickup is free
Transparent Pricing Written Quote FirstVaries; ask for a written quote first
Live WhatsApp Updates Real-time Repair StatusVaries; ask how you will get updates

Xigox charges ₹350 for inspection — credited to your repair cost if you go ahead.

Epson Printer Misaligned Output Repair in Nepean Sea Road — Professional, Reliable, and Affordable

Avoid the directory hustle. Choose a direct service centre with Xigox. Preventive servicing in Nepean Sea Road dramatically extends print head life: periodic nozzle clearing, roller replacement before jamming begins, genuine toner/ink installation. Xigox offers Nepean Sea Road businesses service agreements for any fleet size — covering all labour for Epson Printer Misaligned Output Repair.

Top-Rated Epson Printer Misaligned Output Repair in Nepean Sea Road

You have options in Nepean Sea Road, but Xigox is the preferred choice for the repair. Our core values include complete transparency. Every repair starts with a detailed hardware check costing just ₹350, refunded if you proceed. No hidden charges — just professional repair in Nepean Sea Road.

Same-Day Epson Printer Misaligned Output Repair in Nepean Sea Road

We know you can't stay disconnected in Nepean Sea Road. We plan this issue for rapid turnaround. For most issues, our technicians finish the issue within hours. We arrange secure collection from your Nepean Sea Road home or office, perform the issue using precision tools, and deliver it back to you.

Convenient Collection across Nepean Sea Road

Traveling across town in Nepean Sea Road can be a nightmare. That's why Xigox has built a straightforward pickup and delivery network for the repair. Just drop your pin, and our technician will pick up the Epson from your home or office. After the repair is completed, it is delivered back fully tested and sealed. Save your time without leaving your desk.

All-Brand Epson Printer Misaligned Output Repair in Nepean Sea Road

Your Epson model never limits what we can fix. Xigox engineers are trained across all major brands: HP, Dell, Lenovo, Asus, Acer, MSI, Toshiba, Samsung and Apple MacBook. Different manufacturers have unique design choices we account for in every repair. This depth of brand knowledge reduces repair time and lowers the chance of secondary damage.

Multi-Point Inspection after Epson Printer Misaligned Output Repair

Completing the repair is just the first step at Xigox. Before your Epson is returned in Nepean Sea Road, it undergoes a comprehensive 20-point inspection. We verify that your repair was executed flawlessly, testing thermal performance. This attention to detail is why our return rate is so low across Nepean Sea Road.

Rapid Epson Printer Misaligned Output Repair — Timeline

Wondering how fast Xigox can complete issue in Nepean Sea Road? Our standard process: First — call or WhatsApp +91 74997 61196 and our pickup technician reaches you within 2 hours. Then — ₹350 diagnostic pinpoints the issue. Step 3 — you approve the quote via WhatsApp — zero pressure. Step 4 — this issue is done using OEM-grade components by our engineers, usually within 2–4 hours. Step 5 — your Epson is delivered back to your Nepean Sea Road address with a quality report.

Inkjet & Laser Epson Printer Misaligned Output Repair in Nepean Sea Road

The repair issues are surprisingly common and disruptive. Xigox handles all major printer brands: paper feed jams and roller wear, laser toner sensor failures. Most printer faults fixed: offline status. Corporate print fleets in Nepean Sea Road can sign up for annual maintenance contracts covering all Epson units.

Fixed-Quote Policy for Epson Printer Misaligned Output Repair

The biggest frustration about repair shops in Nepean Sea Road is surprise bills after the job is done. We've built our entire model around transparency. Before any work begins, our technician provides a clear cost estimate that covers everything. You see the exact cost — approve it or decline, no pressure. Our ₹350 inspection fee is fully refunded when you proceed with this issue.

How the Epson Printer Misaligned Output Repair Process Step by Step

Getting your Epson fixed in Nepean Sea Road is designed to be straightforward. First, message us at +91 74997 61196 sharing your issue. Then, our free pickup technician arrives at your Nepean Sea Road address within the same day. Our engineers then perform a detailed diagnostic (₹350, refunded if you proceed). After your approval, the repair is completed with OEM-grade parts — and your Epson is delivered back to you. Total turnaround: 24-48 hours.

Genuine Parts for Epson Printer Misaligned Output Repair

Reliability matters for this issue. That's why our technicians exclusively use original-specification parts for your Epson. Rather than counterfeit components, we source from established suppliers. This ensures your issue is durable, backed by our written 90-day warranty.

Technology keeps your life running — protect it with a dependable Epson Printer Misaligned Output Repair team. Xigox looks after customers across Mumbai, Thane and Palghar with transparent billing. Need a quick fix? WhatsApp us at +91 74997 61196 for priority Epson Printer Misaligned Output Repair in Nepean Sea Road.

Service area

Epson Printer Misaligned Output Repair in Nepean Sea Road — Service Area & Coverage

Xigox provides epson printer misaligned output repair across Nepean Sea Road (PIN 400006), in the Mumbai City district of Mumbai. Our doorstep pickup and on-site service cover the entire Nepean Sea Road area and the neighbourhoods around it.

Localities we cover in Nepean Sea Road: Malabar Hill, Breach Candy. Wherever you are in Nepean Sea Road, we can collect your device from your door and bring it back after the repair.

Our technicians regularly serve homes, societies and offices around Hanging Gardens, Pherozeshah Mehta Park and Walkeshwar Temple (nearby), and along Nepean Sea Road, Bhulabhai Desai Road and Carmichael Road. If you're near any of these landmarks, same-day pickup for epson printer misaligned output repair is almost always available.

Epson Printer Misaligned Output Repair near Nepean Sea Road

We also serve these nearby areas — tap your locality for local epson printer misaligned output repair:

Epson Printer Misaligned Output Repair price in Nepean Sea Road — know it before you book

  1. 1Pick your device & issue
  2. 2See the real price range
  3. 3Free doorstep pickup in Nepean Sea Road

4.9 from 9,727 customer reviews across all repairs · upfront pricing · 90-day warranty

Before you book: have your device model and a quick description of the issue ready — it speeds up your quote.

Not sure what's wrong?

Find Your Fix by Symptom

Tell us what your device is doing — we'll point you to the right repair, with real pricing and next steps.

See all repair problems we fix

Nearest branch: Worli, Dadar

~6.2 km from Nepean Sea Road. With free doorstep pickup you don't need to travel — this is our nearest branch.

Book a repair

Epson Printer Misaligned Output Repair — Book Now

Free pickup · Genuine parts · 90-day warranty

Booking received

We'll call you within 1 hour to confirm your appointment and arrange doorstep pickup.

Inspection fee: ₹350

  • Credited to your total repair cost if you go ahead.
  • Still applies if the device can't be repaired or you decline the repair.

+91

Device type *

Inspection fee: ₹350

  • If you go ahead with the repair, the ₹350 is credited to your total repair cost.
  • If the device can't be repaired or you decide not to continue, the ₹350 inspection fee still applies.

Your details are used only to arrange this repair. By submitting, you agree to our Privacy Policy.

Call WhatsApp