Skip to main content
Epson · Printer Misaligned Output · Kelve Road Station

Epson Printer
Misaligned Output
in Kelve Road Station

Expert diagnosis & repair for Printer Misaligned Output on your Epson device in Kelve Road Station. Free doorstep pickup, genuine parts & 90-day warranty.

✓ ₹350 Inspection (refunded if you proceed with repair) ✓ Free Doorstep Pickup ✓ Same-Day Repair ✓ 90-Day Warranty ✓ All Epson Models

Open 9 AM – 9 PM · 7 days · ₹350 inspection fee (refunded if you proceed with repair)

Symptom Checker

Is Your Epson Device Showing These Signs?

Common symptoms of Printer Misaligned Output on Epson devices. Recognise 2 or more? Book a ₹350 inspection (refunded if you proceed with repair) now.

Laptop clearly shows signs of Printer Misaligned Output

Normal laptop performance significantly impacted

Issue worsening progressively with continued use

Standard user troubleshooting has not resolved it

Laptop has become unreliable for daily work

Risk of further hardware damage if left unaddressed

Don't Delay — Printer Misaligned Output Gets Worse Over Time

Unaddressed hardware issues worsen and can lead to secondary damage, escalating repair costs significantly.

Book Inspection (₹350)
Root Cause Analysis

Why Does Printer Misaligned Output Happen on Epson Devices?

Knowing the root cause ensures a precise repair — not just a temporary fix.

Physical Damage

Accidental drops, pressure or impact causing mechanical damage to internal components.

Liquid Exposure

Water, beverages or humidity causing short circuits or corrosion on circuit boards.

Normal Wear & Tear

Components degrade naturally with regular use — batteries, connectors and hinges most affected.

Manufacturing Defect

Factory faults that surface after the warranty period in certain production batches.

What Will It Cost to Fix?

Repair cost for Epson Printer Misaligned Output in Kelve Road Station depends on model and severity. We provide a free written estimate — no obligation.

Why Us?

Why Choose Xigox for Epson Printer Misaligned Output in Kelve Road Station?

With 1,00,116+ successful repairs and a 4.9-star rating, Xigox is an independent Epson repair specialist serving Kelve Road Station. Covering the entire Palghar district with same-day service.

Full Transparency

We quote before starting work. No hidden fees. You pay exactly what you were quoted.

Lifetime Post-Repair Support

Free WhatsApp support for any questions about your Epson Printer Misaligned Output after repair — always.

Free Pickup & Drop

Collection and return anywhere in Kelve Road Station at no charge for lab-based Epson work — we don't bill for convenience.

Transparent Pricing

₹350 inspection fee (refunded if you proceed). Written quote before any Epson Printer Misaligned Output work begins.

No Fix, No Repair Fee

If we cannot resolve your Epson Printer Misaligned Output issue, you pay nothing beyond the inspection fee.

Component-Level Repairs

We repair Epson hardware at chip and board level where it's safe to do so — often a fraction of a full-module swap.

Repairs Completed
1,00,116+
Since 2011
Average Rating
4.9 ★
9,727+ reviews
Repair Warranty
90 Days
Parts & labour
Avg Response
30 Min
For common issues
Pickup & Drop
Free
₹350 inspection fee
Est. Since
2011
15+ yrs in Palghar

Who repairs your device

Repaired in-house by Xigox technicians

Your Epson is handled by Xigox technicians from start to finish. It is never handed on to another shop. Work that needs the repair bench is done at our workshop in Virar West.

Board-level faults are traced with a microscope, a multimeter and a soldering station before any part is replaced, and parts are fitted only after you approve the quote.

We don't open your personal files during a repair. When a job needs access to your data, such as data recovery or a Windows reinstall, we ask you first.

  • Repaired in-house, not outsourced
  • Quote approved by you before work starts
  • Your files stay private
  • Microscope and board-level tools
  • Genuine or OEM-grade parts
  • 90-day warranty on repairs
Technician inspecting a laptop motherboard under a microscope at the repair bench Technician testing a laptop mainboard with a multimeter beside a Xigox-branded monitor Technician brushing dust off an opened laptop motherboard with a cleaning brush Technician inspecting a laptop motherboard under a microscope at the repair bench
Xigox technicians at the repair bench.
Our Process

How We Fix Epson Printer Misaligned Output

Step-by-step from booking to delivery — complete transparency, no surprises

Tell Us the Problem

Call, WhatsApp or book online. Tell us about the Printer Misaligned Output on your Epson printer in Kelve Road Station. No technical expertise needed.

Free Pickup & Drop

We pick up your Epson printer from your Kelve Road Station address at no transport cost. Bring it to us or we come to you.

₹350 Inspection

A Epson specialist examines your printer and identifies the exact root cause of the Printer Misaligned Output. Full written report provided — ₹350 fee refunded if you proceed with repair.

Transparent Quote

We share a detailed repair quote. Work begins only after your explicit approval — no hidden charges, no surprises.

Professional Repair

Our engineers fix the Printer Misaligned Output using OEM-grade Epson parts. A 12-point quality checklist is completed before your printer is returned.

90-Day Warranty + Delivery

Your Epson printer is returned to your Kelve Road Station address with a written 90-day warranty. Same fault recurs? We fix it free of charge.

Customer reviews

What Customers Say About Laptop & Computer Repairs in Kelve Road Station

4.9/5 · 12 reviews shown

See all 9,727+ reviews

Epson EcoTank ET-2800 — Urgent Printer Fix

“Our Epson EcoTank ET-2800 broke down right before a critical invoice run. Called Xigox Sion for emergency service and technician arrived within two hours. Fixed a jammed fuser and we met our deadline. Lifesaver service.”
R Revati Aphale Kelve Road Station · 13 Mar 2024 19

Brother MFC-L2701DW — WiFi Printer Setup

“Needed Brother MFC-L2701DW set up for wireless printing across our entire office. Xigox Sion configured WiFi, AirPrint, and mobile printing apps. Also set up secure PIN release for confidential documents. Works flawlessly.”
P Preeti Joglekar Kelve Road Station · 9 Apr 2026 38

Canon MAXIFY GX6070 — Printer Noise Fix

“Our Canon MAXIFY GX6070 started making a grinding noise during printing. Xigox Sion found a worn gear in the paper feed mechanism and replaced it. Printer operates quietly and smoothly again. Quick, affordable fix.”
S Suhas Khedekar Kelve Road Station · 8 Jul 2026 9

Epson L3210 — General Printer Repair

“Our office Epson L3210 was producing faded prints with streaks. Xigox Powai technician replaced the worn rollers and fuser element. Print quality is now factory-perfect. Sharp text and vibrant colours. Excellent on-site service.”
S Santosh Konde Chembur West · 27 Dec 2025 28

Epson L5190 — Blank Pages Fix

“Our Epson L5190 was feeding paper but printing blank pages only. Xigox Vile Parle diagnosed a disconnected print head cable and reseated it properly. Full printing restored immediately. Quick diagnosis saved our deadline.”
Y Yogesh Bhosale Goregaon West · 13 Jun 2026 17

Epson L1300 — Printer Not Responding Fix

“Our Epson L1300 showed online but refused to print anything. Xigox Colaba found a corrupted spooler and faulty communication board. Fixed both and updated firmware. Prints instantly now at full rated speed.”
T Tejal Sukthankar Haji Ali · 9 Feb 2025 3
Page 1 / 2

← Swipe or tap dots to browse →

Repair examples

Recently Repaired Printers

View All Recent Repairs

Epson

L805

Fixed
Issue
Photo prints showing incorrect colors — skin tones appearing greenish. Color banding visible in gradient areas.
Solution
Performed nozzle check and deep cleaning. Ran ICM color profile calibration. Aligned print head for optimal dot placement.

Technician's note

Light cyan channel was partially blocked. After 3 cleaning cycles and manual alignment, color accuracy restored to factory spec.

Dadar West 2.5 Hours
  • Epson
  • Photo Printer
  • Color Calibration

Canon

imageCLASS LBP226dw

Fixed
Issue
Printer showing "Toner Low" despite new toner cartridge installed. Print density extremely light.
Solution
Cleaned toner level sensor window inside printer. Reset toner counter. Replaced faulty toner sensor board.

Technician's note

Toner dust had coated the optical sensor, giving false low readings. Sensor board had corroded connector pin.

Goregaon East 2 Hours
  • Canon
  • Laser
  • Toner Sensor

Samsung

Xpress M2835DW

Fixed
Issue
Vertical black lines appearing on every printed page. Print quality deteriorating with ghost images visible.
Solution
Replaced worn imaging drum unit. Cleaned corona wire and transfer roller. Ran diagnostic print to confirm clean output.

Technician's note

Drum surface had scratches causing line defects. Drum at 150%% of rated life — impressive longevity.

Thane West 1.5 Hours
  • Samsung
  • Laser
  • Drum Replacement

HP

DeskJet 2723

Fixed
Issue
Showing "Cartridge Problem" error after installing new cartridges. Printer refusing to print. Orange error light blinking.
Solution
Cleaned cartridge contacts with isopropyl alcohol. Reseated cartridges with proper alignment. Updated printer firmware to recognize new cart...

Technician's note

Oxidation on carriage contacts was causing intermittent connection. Genuine HP cartridges verified.

Powai 30 Minutes
  • HP
  • Cartridge
  • DeskJet

Epson

L3252

Fixed
Issue
Printer not connecting to Wi-Fi network. Wi-Fi Direct not functioning. Mobile printing completely non-operational.
Solution
Updated printer firmware to latest version. Reset network settings and reconfigured Wi-Fi with WPA3 protocol. Tested wireless printing from...

Technician's note

Old firmware had known Wi-Fi bug. Post-update, connection stable at 5GHz band.

Bandra West 45 Minutes
  • Epson
  • Wi-Fi
  • Wireless Printing

Canon

PIXMA G3010

Fixed
Issue
Paper jamming every 3-4 pages. Multiple sheets feeding simultaneously. Grinding noise during paper pickup.
Solution
Replaced worn paper pickup rollers and separation pad. Cleaned dust from feed mechanism. Calibrated paper tray alignment.

Technician's note

Pickup rollers had glazed surface from high humidity. Used genuine Canon rollers for best grip.

Malad West 1.5 Hours
  • Canon
  • Paper Jam
  • Roller Replacement

FAQ

FAQs — Epson Printer Misaligned Output in Kelve Road Station

Everything you need to know before booking your inspection

10 questions answered

It depends on the age and value of the printer. As a rule, if the repair costs less than a third of a comparable replacement and the rest of the hardware is healthy, repairing is worth it. After the inspection we tell you the honest repair cost and what a replacement would run, so the comparison is yours to make — we do not push a repair that is not worth doing. Free pickup also available in Kelve Naka, Kelve Beach, Shirgaon Palghar and surrounding areas.
No. For any printer that still powers on we take a full backup before touching the hardware, and for units that do not, we attempt recovery before repair. Your data is never accessed beyond what the repair requires, and nothing is copied off-site. Our service covers the full 401401 postal area in Kelve Road Station.
For part replacements our technician works at your address in Kelve Road Station. Epson Printer Misaligned Output that traces back to the board needs microscope and hot-air rework, so that job comes to the lab — with free pickup and drop either way. We tell you which category yours is before you commit. We also serve Kelve Naka, Kelve Beach, Shirgaon Palghar, so you can recommend us to neighbours too.
You bring it straight back. The same fault inside 90 days is covered under warranty — no second inspection fee, no diagnostic charge, no argument. The cover is there in writing so you do not have to just take our word for it. Trusted by customers throughout Palghar — rated 4.9★ across 9,727+ reviews.
We use OEM or OEM-grade components and tell you which one your quote covers before work starts. We do not fit unbranded aftermarket parts or recycled pulls sold as new — part quality is the single biggest factor in whether a printer repair lasts, so it is not somewhere we cut cost. Trusted by customers throughout Palghar — rated 4.9★ across 9,727+ reviews.
That is what the ₹350 inspection is for. Symptoms overlap constantly — the same visible behaviour can come from three different components. We test rather than guess, then show you what we found before quoting. If the actual fault turns out to be something cheaper, the quote reflects that. Trusted by customers throughout Palghar — rated 4.9★ across 9,727+ reviews.
Usually not for long. Left alone, most faults of this kind put stress on neighbouring components and turn a contained repair into a board-level one. If you cannot bring it in immediately, tell us the symptoms on WhatsApp and we will tell you honestly whether it can wait a few days or should be powered down now. We also serve Kelve Naka, Kelve Beach, Shirgaon Palghar, so you can recommend us to neighbours too.
Yes — Xigox specialises in Epson Printer Misaligned Output across Kelve Road Station. Our experienced technicians diagnose and fix the problem efficiently, using OEM-quality parts and backed by a 90-day warranty. Free doorstep pickup is available in Kelve Road Station — call or WhatsApp +91 74997 61196. We also serve Kelve Naka, Kelve Beach, Shirgaon Palghar, so you can recommend us to neighbours too.
Most Epson Printer Misaligned Output issues in Kelve Road Station are resolved the same day — typically within 2–4 hours of pickup. We provide an accurate time estimate during the ₹350 inspection (refunded if you proceed with repair) so you're never left guessing. Trusted by customers throughout Palghar — rated 4.9★ across 9,727+ reviews.
Common causes of Epson Printer Misaligned Output include physical impact, wear and tear, manufacturing defects, water damage, overheating, or software conflicts. Xigox technicians perform a thorough diagnosis to identify the root cause and fix it permanently rather than applying a temporary patch. Customers near Saphale in Kelve Road Station are covered by our free pickup.

Still have questions?

Send us your question on WhatsApp or call — a technician will answer.

Epson Printer Repair in Kelve Road Station — Xigox

If you are looking for Epson Printer repair in Kelve Road Station that is not a brand service centre, this is it. Xigox has run an independent Epson bench since 2011, and our technicians work on Epson boards and firmware every day rather than treating them as an occasional job. More than 1,00,000 repairs and a 4.9-star average rating sit behind that.

We stock genuine Epson parts and OEM-compatible components for every common Printer fault — from screen replacements and battery swaps to logic board repairs and data recovery. Before any work begins, you receive a written cost estimate. Our ₹350 inspection fee is refunded if you proceed with the repair.

We actively serve the entire 401401 postal area within Palghar district, ensuring same-day response for every repair request. ₹350 inspection fee (refunded if you proceed with repair). Located near Saphale, our service coverage extends across Kelve Road Station and all surrounding localities. In addition to Kelve Road Station, we also provide doorstep repairs and free pickup for lab work for customers in Kelve Naka, Kelve Beach, Shirgaon Palghar and other nearby areas.

Doorstep part replacement (battery, keyboard, screen, SSD, RAM) is available across Kelve Road Station. For chip-level and motherboard repairs, we provide free pickup and drop — confirming within 15 minutes of your booking. Most common faults are resolved same-day. For complex repairs, we provide a realistic timeline and keep you updated throughout.

We back Epson work with a 90-day parts-and-labour warranty in writing, not just a verbal promise. If your Printer does come back with the same fault, we cover it. You keep a direct WhatsApp line to the team that did the work.

Service Hours

Monday – Sunday · 9 AM – 9 PM

Open on all public holidays

Service Area

Kelve Road Station & surrounding Mumbai areas

Doorstep repairs + free pickup for lab work

Contact Us

+91 74997 61196

info@xigox.com

Our Guarantee

90-day warranty on all repairs

Free re-repair if same fault recurs

Product lines

Epson Series We Cover for Printer Misaligned Output repair in Kelve Road Station

Xigox keeps Epson parts and service documentation for 2 Epson series, so Printer Misaligned Output repair on a EcoTank and WorkForce machine is handled by someone who has seen that chassis before. We regularly take in EcoTank and WorkForce units for Printer Misaligned Output repair in Kelve Road Station. Specific Epson models on our current service list include Epson EcoTank ET-2800, Epson L1300, Epson L3210 and Epson L3250. If your Epson model is not listed, it is almost certainly still covered — send us the model number on the base sticker and we will confirm parts availability before you book.

  • EcoTank
  • WorkForce

Epson EcoTank

The Epson M2140 is part of Epson's M-series — Epson's monochrome ink-tank printer line, built specifically for high-volume black-and-white document printing.

Worth knowing for this repair: Monochrome-only, ink-tank-based — optimized specifically for high-volume text document printing rather than photos.

Epson M2140

Epson WorkForce

The Epson WorkForce WF-2860 is part of Epson's WorkForce line — Epson's business inkjet printer series, built for office document volume with business-oriented features (networking, higher-capacity paper trays).

Worth knowing for this repair: Business-oriented inkjet with networking support for shared office use.

Epson WorkForce WF-2860

Printer Misaligned Output Repair for All Epson Models in Kelve Road Station

Select your specific Epson model for a more targeted diagnosis page

Printer Misaligned Output Repair for Other Brands in Kelve Road Station

We fix Printer Misaligned Output across all major laptop and computer brands with the same quality and warranty

Areas, Roads & Landmarks We Cover in Kelve Road Station

Free pickup & drop across all these neighbourhoods

Localities & neighbourhoods

  • Kelve Road
  • Saphale

Roads & highways

  • Kelve Station Road
  • NH-48 (Mumbai-Ahmedabad Highway)
  • Kelve Mahim Road

Landmarks & famous places

  • Kelve Road Station
  • Kelve Beach (nearby)
  • Mahim Devi Temple (nearby)

Epson Printer Misaligned Output Repair — All Locations

Explore more services

More Repair & Tech Services Near Kelve Road Station

Same technicians · Free pickup · 90-day warranty across all services.

₹350 Inspection (refunded if you proceed with repair) · 1,00,000+ Repairs · 4.9 ★ · 90-Day Warranty

Fix Your Epson Device's
Printer Misaligned Output Today

₹350 Inspection (refunded if you proceed with repair) · Expert repair for Printer Misaligned Output · 90-day warranty

Serving Kelve Road Station and all of Mumbai MMR · Open 9 AM – 9 PM daily

Comparison

Xigox vs Other Epson Printer Misaligned Output Shops in Kelve Road Station

What you get with Xigox in Kelve Road Station, side by side.

FeatureXigoxOther shops
Experienced Technicians Trained & VerifiedVaries; ask who will work on the device
Genuine / OEM Parts OEM-Quality PartsVaries; ask which part will be fitted
90-Day Warranty Written CertificateVaries; ask for the warranty in writing
Diagnosis / Inspection ₹350, credited to the repairVaries; ask what the diagnosis costs
Same-Day Turnaround Kelve Road Station — Most RepairsVaries; ask for a time in writing
Free Doorstep Pickup Kelve Road Station — FreeVaries; ask whether pickup is free
Transparent Pricing Written Quote FirstVaries; ask for a written quote first
Live WhatsApp Updates Real-time Repair StatusVaries; ask how you will get updates

Xigox charges ₹350 for inspection — credited to your repair cost if you go ahead.

Epson Printer Misaligned Output Repair in Kelve Road Station — Professional, Reliable, and Affordable

Tired of middlemen? Work with the actual repair team — Xigox. Laser printing issues — streaks, ghosting, or toner not fusing require targeted fault isolation: exactly which component has failed?. Xigox engineers never replace all laser consumables speculatively — saving businesses ₹3,000–₹8,000 in unnecessary parts. Epson Printer Misaligned Output Repair in Kelve Road Station includes a print quality verification before handover.

How the Epson Printer Misaligned Output Repair Process in Kelve Road Station

Getting your Epson fixed in Kelve Road Station is designed to be hassle-free. First, message us at +91 74997 61196 sharing your issue. Then, our free pickup technician arrives at your Kelve Road Station address within the same day. Our engineers then perform a detailed diagnostic (₹350, refunded if you proceed). After your approval, this issue is completed with OEM-grade parts — and your Epson is delivered back to you. Total turnaround: 24-48 hours.

Guaranteed Protection for Epson Printer Misaligned Output Repair

Every repair completed by Xigox in Kelve Road Station comes with a documented three-month warranty on parts and labour. That means, if anything goes wrong within 3 months, we fix it at zero extra cost. You get a written warranty card with every repair, so the terms are clear.

The Best Choice for Epson Printer Misaligned Output Repair in Kelve Road Station

You have options in Kelve Road Station, but Xigox is the preferred choice for this issue. Our core values include complete transparency. Every issue starts with a detailed hardware check costing just ₹350, refunded if you proceed. No hidden charges — just professional issue in Kelve Road Station.

Authentic Components for Epson Printer Misaligned Output Repair

Longevity matters for the repair. That's why our technicians exclusively use OEM-grade parts for your Epson. Rather than grey-market components, we source from established suppliers. This ensures your repair is durable, backed by our written 90-day warranty.

No Hidden Costs Policy for Epson Printer Misaligned Output Repair

One of the most common complaints about repair shops in Kelve Road Station is hidden charges after the job is done. Xigox operates differently. Prior to touching your Epson, our technician shares a written quote covering parts and labour. There is zero ambiguity — the decision is entirely yours. The ₹350 diagnostic is credited 100% when you approve the repair.

Same-Day Epson Printer Misaligned Output Repair — How It Works

Wondering how fast Xigox can complete repair in Kelve Road Station? Our standard process: First — call or WhatsApp +91 74997 61196 and our pickup technician arrives at your Kelve Road Station address within 2 hours. Then — ₹350 diagnostic pinpoints the issue. Step 3 — you approve the quote via WhatsApp — zero pressure. Step 4 — the repair is done using OEM-grade components by our engineers, usually within 2–4 hours. Step 5 — your Epson is delivered back to you with a quality report.

Safe & Secure Epson Printer Misaligned Output Repair

Your personal data is our top priority during your issue. Customers throughout Kelve Road Station trust us because we never access personal files. Throughout the issue, your confidential files remain untouched. If a software reset is necessary, we consult you beforehand.

Printer Epson Printer Misaligned Output Repair in Kelve Road Station

Printer problems are surprisingly common and disruptive. Xigox handles HP, Canon, Epson, and Brother printers: inkjet clogging and print head cleaning, drum unit replacement. Common issues we resolve same-day: Wi-Fi connectivity. Corporate print fleets in Kelve Road Station benefit from AMC plans covering all Epson units.

Free Logistics across Kelve Road Station

Traveling across town in Kelve Road Station takes hours. That's why Xigox has built a straightforward pickup and delivery network for this issue. Simply share your Kelve Road Station address, and our technician will pick up the Epson from your home or office. After the issue is completed, it is delivered back fully tested and sealed. Save your time without leaving your desk.

No-Obligation Testing in Kelve Road Station

Uncertain about the issue with your Epson? Prior to starting any repair, Xigox performs a thorough diagnostic check. The ₹350 inspection fee, it is 100% refunded if you proceed with the repair. Our local experts will show you the broken part in plain English so you can make an informed decision.

Ready when you are in Kelve Road Station. From emergency repairs to planned maintenance, Xigox takes the stress out of Epson Printer Misaligned Output Repair: doorstep collection, OEM-grade spares, same-day turnaround, and a written warranty. Call +91 74997 61196 now.

Service area

Epson Printer Misaligned Output Repair in Kelve Road Station — Service Area & Coverage

Xigox provides epson printer misaligned output repair across Kelve Road Station (PIN 401401), in the Palghar district of Kelve Road. Our doorstep pickup and on-site service cover the entire Kelve Road Station area and the neighbourhoods around it.

Localities we cover in Kelve Road Station: Kelve Road, Saphale. Wherever you are in Kelve Road Station, we can collect your device from your door and bring it back after the repair.

Our technicians regularly serve homes, societies and offices around Kelve Road Station, Kelve Beach (nearby) and Mahim Devi Temple (nearby), and along Kelve Station Road, NH-48 (Mumbai-Ahmedabad Highway) and Kelve Mahim Road. If you're near any of these landmarks, same-day pickup for epson printer misaligned output repair is almost always available.

Epson Printer Misaligned Output Repair near Kelve Road Station

We also serve these nearby areas — tap your locality for local epson printer misaligned output repair:

Epson Printer Misaligned Output Repair price in Kelve Road Station — know it before you book

  1. 1Pick your device & issue
  2. 2See the real price range
  3. 3Free doorstep pickup in Kelve Road Station

4.9 from 9,727 customer reviews across all repairs · upfront pricing · 90-day warranty

Before you book: have your device model and a quick description of the issue ready — it speeds up your quote.

Not sure what's wrong?

Find Your Fix by Symptom

Tell us what your device is doing — we'll point you to the right repair, with real pricing and next steps.

See all repair problems we fix

Our head office: Virar West

~30.7 km from Kelve Road Station. With free doorstep pickup you don't need to travel — this is where the repair is done.

Book a repair

Epson Printer Misaligned Output Repair — Book Now

Free pickup · Genuine parts · 90-day warranty

Booking received

We'll call you within 1 hour to confirm your appointment and arrange doorstep pickup.

Inspection fee: ₹350

  • Credited to your total repair cost if you go ahead.
  • Still applies if the device can't be repaired or you decline the repair.

+91

Device type *

Inspection fee: ₹350

  • If you go ahead with the repair, the ₹350 is credited to your total repair cost.
  • If the device can't be repaired or you decide not to continue, the ₹350 inspection fee still applies.

Your details are used only to arrange this repair. By submitting, you agree to our Privacy Policy.

Call WhatsApp