Skip to main content
Kyocera · Ink Smudging · Santacruz

Kyocera Printer
Ink Smudging
in Santacruz

Expert diagnosis & repair for Ink Smudging on your Kyocera device in Santacruz. Free doorstep pickup, genuine parts & 90-day warranty.

✓ ₹350 Inspection (refunded if you proceed with repair) ✓ Free Doorstep Pickup ✓ Same-Day Repair ✓ 90-Day Warranty ✓ All Kyocera Models

Open 9 AM – 9 PM · 7 days · ₹350 inspection fee (refunded if you proceed with repair)

Symptom Checker

Is Your Kyocera Device Showing These Signs?

Common symptoms of Ink Smudging on Kyocera devices. Recognise 2 or more? Book a ₹350 inspection (refunded if you proceed with repair) now.

Laptop clearly shows signs of Ink Smudging

Normal laptop performance significantly impacted

Issue worsening progressively with continued use

Standard user troubleshooting has not resolved it

Laptop has become unreliable for daily work

Risk of further hardware damage if left unaddressed

Don't Delay — Ink Smudging Gets Worse Over Time

Unaddressed hardware issues worsen and can lead to secondary damage, escalating repair costs significantly.

Book Inspection (₹350)
Root Cause Analysis

Why Does Ink Smudging Happen on Kyocera Devices?

Knowing the root cause ensures a precise repair — not just a temporary fix.

Physical Damage

Accidental drops, pressure or impact causing mechanical damage to internal components.

Liquid Exposure

Water, beverages or humidity causing short circuits or corrosion on circuit boards.

Normal Wear & Tear

Components degrade naturally with regular use — batteries, connectors and hinges most affected.

Manufacturing Defect

Factory faults that surface after the warranty period in certain production batches.

Cost Estimate

Kyocera Ink Smudging Repair Cost in Santacruz

Transparent pricing · ₹350 inspection fee (refunded if you proceed with repair) first · Pay only after approval

Repair TypeEstimated CostWarranty
Printer Basic Service ₹499 - ₹899 90 Days
Printer Setup & Network ₹499 - ₹999 90 Days
Printer Hardware Repair ₹1,199 - ₹2,299 90 Days
Printer Complete Overhaul ₹2,399 - ₹4,499 90 Days

Final cost confirmed after ₹350 inspection (refunded if you proceed with repair). Work starts only with your approval.

Get Exact Quote

Why Us?

Why Choose Xigox for Kyocera Printer Ink Smudging in Santacruz?

With 1,00,424+ successful repairs and a 4.9-star rating, Xigox is an independent Kyocera repair specialist serving Santacruz. Serving all addresses in the 400054 postal zone.

Lifetime Post-Repair Support

Free WhatsApp support for any questions about your Kyocera Printer Ink Smudging after repair — always.

Free Pickup & Drop

Collection and return anywhere in Santacruz at no charge for lab-based Kyocera work — we don't bill for convenience.

Transparent Pricing

₹350 inspection fee (refunded if you proceed). Written quote before any Kyocera Printer Ink Smudging work begins.

No Fix, No Repair Fee

If we cannot resolve your Kyocera Printer Ink Smudging issue, you pay nothing beyond the inspection fee.

Component-Level Repairs

We repair Kyocera hardware at chip and board level where it's safe to do so — often a fraction of a full-module swap.

Experienced Technicians

Our engineers work on Kyocera hardware regularly. Every repair is tested before return.

Repairs Completed
1,00,424+
Since 2011
Average Rating
4.9 ★
9,605+ reviews
Repair Warranty
90 Days
Parts & labour
Avg Response
30 Min
For common issues
Pickup & Drop
Free
₹350 inspection fee
Est. Since
2011
15+ yrs in Mumbai Suburban

Who repairs your device

Repaired in-house by Xigox technicians

Your Kyocera is handled by Xigox technicians from start to finish. It is never handed on to another shop. Work that needs the repair bench is done at our workshop in Virar West.

Board-level faults are traced with a microscope, a multimeter and a soldering station before any part is replaced, and parts are fitted only after you approve the quote.

We don't open your personal files during a repair. When a job needs access to your data, such as data recovery or a Windows reinstall, we ask you first.

  • Repaired in-house, not outsourced
  • Quote approved by you before work starts
  • Your files stay private
  • Microscope and board-level tools
  • Genuine or OEM-grade parts
  • 90-day warranty on repairs
Technician inspecting a laptop motherboard under a microscope at the repair bench Technician testing a laptop mainboard with a multimeter beside a Xigox-branded monitor Technician brushing dust off an opened laptop motherboard with a cleaning brush Technician inspecting a laptop motherboard under a microscope at the repair bench
Xigox technicians at the repair bench.
Our Process

How We Fix Kyocera Ink Smudging

Step-by-step from booking to delivery — complete transparency, no surprises

Tell Us the Problem

Call, WhatsApp or book online. Tell us about the Ink Smudging on your Kyocera printer in Santacruz. No technical expertise needed.

Free Pickup & Drop

We pick up your Kyocera printer from your Santacruz address at no transport cost. Bring it to us or we come to you.

₹350 Inspection

A Kyocera specialist examines your printer and identifies the exact root cause of the Ink Smudging. Full written report provided — ₹350 fee refunded if you proceed with repair.

Transparent Quote

We share a detailed repair quote. Work begins only after your explicit approval — no hidden charges, no surprises.

Professional Repair

Our engineers fix the Ink Smudging using OEM-grade Kyocera parts. A multi-point quality checklist is completed before your printer is returned.

90-Day Warranty + Delivery

Your Kyocera printer is returned to your Santacruz address with a written 90-day warranty. Same fault recurs? We fix it free of charge.

Customer reviews

What Customers Say About Laptop & Computer Repairs in Santacruz

4.9/5 · 9 reviews shown

See all 9,605+ reviews

Brother DCP-T420W — New Printer Setup

“Needed our new Brother DCP-T420W connected to twelve office computers. Xigox Santacruz configured network printing, scan-to-email, and installed drivers on every machine. Double-sided defaults set up too. Smooth and professional setup.”
G Girish Jog Santacruz · 31 Jan 2026 45

Epson M2140 — Colour Mismatch Fix

“Colours on our Epson M2140 were completely off — reds looked orange and blues looked purple. Xigox Santacruz recalibrated the colour profiles and replaced a worn imaging drum. Prints match on-screen colours perfectly now.”
K Kishore Bhandarkar Santacruz · 27 Jan 2025 10

Canon PIXMA G2010 — Printer Noise Fix

“Our Canon PIXMA G2010 started making a grinding noise during printing. Xigox Santacruz found a worn gear in the paper feed mechanism and replaced it. Printer operates quietly and smoothly again. Quick, affordable fix.”
A Alka Marathe Santacruz · 28 May 2025 28

Canon PIXMA G3010 — Annual Maintenance

“Called Xigox Santacruz for annual service of our Canon PIXMA G3010. They cleaned rollers, replaced pads, lubricated carriage, updated firmware, and calibrated colours. Printer runs faster and quieter now. Comprehensive and thorough work.”
S Smita Patil Santacruz · 8 Mar 2026 5

Canon imageCLASS MF244dw — WiFi Printer Setup

“Needed Canon imageCLASS MF244dw set up for wireless printing across our entire office. Xigox Santacruz configured WiFi, AirPrint, and mobile printing apps. Also set up secure PIN release for confidential documents. Works flawlessly.”
S Siddesh Pai Santacruz · 24 Sep 2025 6

HP OfficeJet Pro 9015 — Urgent Printer Fix

“Our HP OfficeJet Pro 9015 broke down right before a critical invoice run. Called Xigox Santacruz for emergency service and technician arrived within two hours. Fixed a jammed fuser and we met our deadline. Lifesaver service.”
S Swati Bhatt Santacruz · 9 Apr 2026 12
Page 1 / 2

← Swipe or tap dots to browse →

Repair examples

Recently Repaired Printers

View All Recent Repairs

HP

LaserJet Pro M404dn

Fixed
Issue
Printer producing wrinkled, smeared pages with toner marks on backside. Fuser roller showing visible wear.
Solution
Replaced faulty fuser assembly with OEM part. Cleaned paper path rollers. Printed 50-page test run with zero defects.

Technician's note

Fuser exceeded rated page count of 100K. Recommended replacement every 80K pages for consistent output.

Andheri West 2 Hours
  • Laser Printer
  • HP
  • Fuser Repair

Samsung

Xpress M2835DW

Fixed
Issue
Vertical black lines appearing on every printed page. Print quality deteriorating with ghost images visible.
Solution
Replaced worn imaging drum unit. Cleaned corona wire and transfer roller. Ran diagnostic print to confirm clean output.

Technician's note

Drum surface had scratches causing line defects. Drum at 150%% of rated life — impressive longevity.

Thane West 1.5 Hours
  • Samsung
  • Laser
  • Drum Replacement

Epson

L805

Fixed
Issue
Photo prints showing incorrect colors — skin tones appearing greenish. Color banding visible in gradient areas.
Solution
Performed nozzle check and deep cleaning. Ran ICM color profile calibration. Aligned print head for optimal dot placement.

Technician's note

Light cyan channel was partially blocked. After 3 cleaning cycles and manual alignment, color accuracy restored to factory spec.

Dadar West 2.5 Hours
  • Epson
  • Photo Printer
  • Color Calibration

Canon

PIXMA G620

Fixed
Issue
Color prints showing streaks, missing cyan. Nozzle blocked.
Solution
Deep chemical cleaning of print head. Restored all color channels.
Bandra East 1 Hours
  • Inkjet
  • Canon
  • Head Clean

HP

LaserJet M428fdw

Fixed
Issue
Scanner producing black lines across scanned documents. ADF feeding but scanner output corrupted.
Solution
Replaced cracked ADF scanner glass strip. Cleaned flatbed scanner glass and calibration strip. Tested scan-to-email and copy functions.

Technician's note

Hairline crack in CIS scanner glass invisible to naked eye but caused consistent vertical line artifact.

Vikhroli East 1.5 Hours
  • HP
  • MFP
  • Scanner

Epson

EcoTank L3250

Fixed
Issue
Cannot connect to Wi-Fi. Mobile printing not working.
Solution
Reset network settings. Configured Wi-Fi Direct and router. Set up Print apps.
Lower Parel 1 Hours
  • Wireless
  • Epson
  • Wi-Fi

FAQ

FAQs — Kyocera Ink Smudging in Santacruz

Everything you need to know before booking your inspection

10 questions answered

Every repair at Xigox — including Kyocera Printer Not Scanning fixes — is covered by a 90-day warranty. If the same problem recurs within 90 days, we repair it free of charge. Our warranty is provided in writing and applies to all repairs across Santacruz and Mumbai MMR. Customers near Nehru Nagar in Santacruz are covered by our free pickup.
The cost to fix Kyocera Printer Not Scanning in Santacruz varies by printer model and severity. Xigox charges ₹350 for inspection — refunded if you proceed with the repair. A transparent written quote before any work begins. You're never charged until you approve the repair — no hidden fees, ever. Our service covers the full 400054 postal area in Santacruz.
Xigox repairs Kyocera Printer Not Scanning on HP, Canon, Epson, Brother, Samsung, Ricoh and Kyocera, and more. Our engineers are trained on brand-specific procedures and we stock genuine-grade parts for the most common models, so most repairs in Santacruz are completed the same day. Customers near Nehru Nagar in Santacruz are covered by our free pickup.
It depends on the age and value of the printer. As a rule, if the repair costs less than a third of a comparable replacement and the rest of the hardware is healthy, repairing is worth it. After the inspection we tell you the honest repair cost and what a replacement would run, so the comparison is yours to make — we do not push a repair that is not worth doing. We also serve Santacruz West, Milan Subway, Juhu Vile Parle, so you can recommend us to neighbours too.
No. For any printer that still powers on we take a full backup before touching the hardware, and for units that do not, we attempt recovery before repair. Your data is never accessed beyond what the repair requires, and nothing is copied off-site. We also serve Santacruz West, Milan Subway, Juhu Vile Parle, so you can recommend us to neighbours too.
For part replacements our technician works at your address in Santacruz. Kyocera Printer Not Scanning that traces back to the board needs microscope and hot-air rework, so that job comes to the lab — with free pickup and drop either way. We tell you which category yours is before you commit. Trusted by customers throughout Mumbai Suburban — rated 4.9★ across 9,605+ reviews.
You bring it straight back. The same fault inside 90 days is covered under warranty — no second inspection fee, no diagnostic charge, no argument. The cover is there in writing so you do not have to just take our word for it. We've been serving Mumbai Suburban district for over 15 years.
We use OEM or OEM-grade components and tell you which one your quote covers before work starts. We do not fit unbranded aftermarket parts or recycled pulls sold as new — part quality is the single biggest factor in whether a printer repair lasts, so it is not somewhere we cut cost. We've been serving Mumbai Suburban district for over 15 years.
That is what the ₹350 inspection is for. Symptoms overlap constantly — the same visible behaviour can come from three different components. We test rather than guess, then show you what we found before quoting. If the actual fault turns out to be something cheaper, the quote reflects that. Customers near Nehru Nagar in Santacruz are covered by our free pickup.
Usually not for long. Left alone, most faults of this kind put stress on neighbouring components and turn a contained repair into a board-level one. If you cannot bring it in immediately, tell us the symptoms on WhatsApp and we will tell you honestly whether it can wait a few days or should be powered down now. We also serve Santacruz West, Milan Subway, Juhu Vile Parle, so you can recommend us to neighbours too.

Still have questions?

Send us your question on WhatsApp or call — a technician will answer.

Kyocera Printer Repair in Santacruz — Xigox

Xigox is Santacruz's leading independent specialist for Kyocera Printer repair. Our engineers are not generalists — they undergo dedicated training on Kyocera hardware, firmware and diagnostics. Since 2011, we have completed over 1,00,000+ repairs across all Kyocera product lines, earning a 4.9-star average customer rating.

Every Kyocera component we fit is OEM-grade and batch-tested before it goes into your Printer — no aftermarket substitutes, no recycled pulls sold as new. You see the part cost and the labour cost separately on the estimate before we start, and the ₹350 inspection comes off the bill if you go ahead.

We actively serve the entire 400054 postal area within Mumbai Suburban district, ensuring same-day response for every repair request. ₹350 inspection fee (refunded if you proceed with repair). Located near Nehru Nagar, our service coverage extends across Santacruz and all surrounding localities. In addition to Santacruz, we also provide doorstep repairs and free pickup for lab work for customers in Santacruz West, Milan Subway, Juhu Vile Parle and other nearby areas.

How your Kyocera Printer gets serviced depends on the fault. Part swaps happen on-site anywhere in Santacruz; board-level work goes to the bench because it needs proper rework equipment. Either way collection and return are free, and you get progress updates rather than having to chase us.

Your Kyocera Printer leaves with a written 90-day warranty covering both parts and labour. Same fault back inside that window and we redo it free — no argument, no diagnostic fee. WhatsApp support stays open afterwards for any question about the repair.

Service Hours

Monday – Sunday · 9 AM – 9 PM

Open on all public holidays

Service Area

Santacruz & surrounding Mumbai areas

Doorstep repairs + free pickup for lab work

Contact Us

+91 74997 61196

info@xigox.com

Our Guarantee

90-day warranty on all repairs

Free re-repair if same fault recurs

Product lines

Kyocera Series We Cover for Ink Smudging repair in Santacruz

Our bench covers 2 distinct Kyocera series. That matters for Ink Smudging repair, because a ECOSYS and a TASKalfa are stripped down very differently. We regularly take in ECOSYS and TASKalfa units for Ink Smudging repair in Santacruz. Specific Kyocera models on our current service list include Kyocera ECOSYS M2040dn, Kyocera ECOSYS P2040dn and Kyocera TASKalfa 2321. If your Kyocera model is not listed, it is almost certainly still covered — send us the model number on the base sticker and we will confirm parts availability before you book.

  • ECOSYS
  • TASKalfa

Kyocera ECOSYS

The Kyocera ECOSYS is part of Kyocera's ECOSYS line — Kyocera's laser printer series, known for a long-life drum design that reduces the frequency of consumable replacement compared to typical laser printers.

Worth knowing for this repair: Toner-based laser printing for low per-page document cost.

Kyocera ECOSYS M2040dn Kyocera ECOSYS P2040dn

Kyocera TASKalfa

The Kyocera TASKalfa 2321 is part of Kyocera's TASKalfa line — Kyocera's higher-volume multifunction printer/copier series for busier office environments.

Kyocera TASKalfa 2321

Ink Smudging Repair for All Kyocera Models in Santacruz

Select your specific Kyocera model for a more targeted diagnosis page

Ink Smudging Repair for Other Brands in Santacruz

We fix Ink Smudging across all major laptop and computer brands with the same quality and warranty

Areas, Roads & Landmarks We Cover in Santacruz

Free pickup & drop across all these neighbourhoods

Localities & neighbourhoods

  • Santacruz West
  • Santacruz East
  • Vakola
  • Kalina
  • Nehru Nagar

Roads & highways

  • Linking Road
  • S.V. Road
  • Juhu Road
  • Juhu Tara Road

Landmarks & famous places

  • Domestic Airport
  • Guru Nanak Hospital
  • Santacruz Market

Kyocera Ink Smudging Repair — All Locations

Explore more services

More Repair & Tech Services Near Santacruz

Same technicians · Free pickup · 90-day warranty across all services.

₹350 Inspection (refunded if you proceed with repair) · 1,00,000+ Repairs · 4.9 ★ · 90-Day Warranty

Fix Your Kyocera Device's
Ink Smudging Today

₹350 Inspection (refunded if you proceed with repair) · Expert repair for Ink Smudging · 90-day warranty

Serving Santacruz and all of Mumbai MMR · Open 9 AM – 9 PM daily

Comparison

Xigox vs Other Kyocera Ink Smudging Shops in Santacruz

What you get with Xigox in Santacruz, side by side.

FeatureXigoxOther shops
Experienced Technicians Trained & VerifiedVaries; ask who will work on the device
Genuine / OEM Parts OEM-Quality PartsVaries; ask which part will be fitted
90-Day Warranty Written CertificateVaries; ask for the warranty in writing
Diagnosis / Inspection ₹350, credited to the repairVaries; ask what the diagnosis costs
Same-Day Turnaround Santacruz — Most RepairsVaries; ask for a time in writing
Free Doorstep Pickup Santacruz — FreeVaries; ask whether pickup is free
Transparent Pricing Written Quote FirstVaries; ask for a written quote first
Live WhatsApp Updates Real-time Repair StatusVaries; ask how you will get updates

Xigox charges ₹350 for inspection — credited to your repair cost if you go ahead.

Kyocera Ink Smudging Repair in Santacruz — Professional, Reliable, and Affordable

Why waste time on aggregators? Get direct service without middleman markup with Xigox. Kyocera Ink Smudging Repair requires different diagnostic skills — diagnosing whether it's a drum, cartridge, or mechanical fault requires specific training. Xigox's printer technicians are specialists in inkjet and laser technology: inkjet head servicing, laser component overhaul. Most Kyocera Ink Smudging Repair jobs are completed same-day.

Express Kyocera Ink Smudging Repair — What to Expect

Curious how quickly Xigox can complete repair in Santacruz? Here's our typical timeline: Step 1 — message us and our pickup technician arrives at your Santacruz address within 2 hours. Step 2 — our inspection identifies the exact fault. Next — you give the go-ahead via WhatsApp — completely your decision. Finally — the repair is executed using genuine parts at our Virar West workshop, often same day. Then — we return it to you fully tested.

Print Head Kyocera Ink Smudging Repair in Santacruz

Printer problems cost Santacruz businesses hours of lost productivity. Xigox handles HP, Canon, Epson, and Brother printers: inkjet clogging and print head cleaning, laser toner sensor failures. Common issues we resolve same-day: ink streaks. Offices with multiple printers benefit from AMC plans covering all Kyocera units.

Quick & Hassle-Free Kyocera Ink Smudging Repair in Santacruz

We know your time is valuable in Santacruz. Xigox plans the repair for rapid turnaround. In 90% of cases, our technicians complete the repair on the same day. Our team offers free doorstep pickup from your Santacruz address, execute the repair at our workshop, and return it to you.

Urgent Kyocera Ink Smudging Repair Now

Can't wait 48 hours? Xigox offers rush this issue in Santacruz for urgent situations. From an important client meeting and your Kyocera just crashed, our emergency service moves your Kyocera to the front of the line, so most repairs can be finished the same business day. Emergency this issue can be arranged including weekends in Santacruz. Just say 'priority' when calling and our team will fast-track your issue immediately.

Transparent Pricing Policy for Kyocera Ink Smudging Repair

One of the most common complaints about repair shops in Santacruz is hidden charges after the job is done. Xigox operates differently. Prior to touching your Kyocera, our technician sends a WhatsApp quote covering parts and labour. There is zero ambiguity — the decision is entirely yours. The ₹350 diagnostic is credited 100% when you approve the repair.

Doorstep Pickup & Drop across Santacruz

Navigating traffic in Santacruz is stressful. To solve this, Xigox offers a no-hassle doorstep logistics service for this issue. Simply share your Santacruz address, and our secure courier will collect your Kyocera directly from you. Once the issue is finished, we safely return it in protective packaging. Enjoy total convenience without leaving your desk.

Why Choose Us for Kyocera Ink Smudging Repair in Santacruz

You have options in Santacruz, but Xigox is the preferred choice for the repair. Our core values include total honesty. Every repair starts with a detailed hardware check costing just ₹350, refunded if you proceed. No hidden charges — just professional repair in Santacruz.

Post-Repair Support for Kyocera Ink Smudging Repair

All this issue completed by Xigox in Santacruz comes with a written three-month warranty on parts and labour. That means, if anything goes wrong within 3 months, we fix it at zero extra cost. You get a written warranty card with every issue, so the terms are clear.

Upfront Diagnosis in Santacruz

Not sure what's wrong with your Kyocera? Before you commit to any repair, Xigox conducts a comprehensive hardware inspection. While we charge a nominal ₹350, this amount is fully refunded when you approve the quote. Our local experts will explain the exact fault clearly so you can make an informed decision.

Business & Corporate Kyocera Ink Smudging Repair in Santacruz

Xigox isn't just for individuals Santacruz rely on our issue to keep operations running. Our corporate solutions include bulk repair contracts, same-day priority service, and dedicated account managers. Whether you have 5 laptops or 500, Xigox handles this issue for your Santacruz office with corporate billing and detailed repair documentation.

Technology keeps your life running — protect it with a dependable Kyocera Ink Smudging Repair team. Xigox looks after customers across Mumbai, Thane and Palghar with honest quotes. Need a quick fix? Reach us at +91 74997 61196 for instant Kyocera Ink Smudging Repair in Santacruz.

Service area

Kyocera Ink Smudging Repair in Santacruz — Service Area & Coverage

Xigox provides kyocera ink smudging repair across Santacruz (PIN 400054), in the Mumbai Suburban district of Mumbai. Our doorstep pickup and on-site service cover the entire Santacruz area and the neighbourhoods around it.

Localities we cover in Santacruz: Santacruz West, Santacruz East, Vakola, Kalina, Nehru Nagar. Wherever you are in Santacruz, we can collect your device from your door and bring it back after the repair.

Our technicians regularly serve homes, societies and offices around Domestic Airport, Guru Nanak Hospital and Santacruz Market, and along Linking Road, S.V. Road, Juhu Road and Juhu Tara Road. If you're near any of these landmarks, same-day pickup for kyocera ink smudging repair is almost always available.

Kyocera Ink Smudging Repair near Santacruz

We also serve these nearby areas — tap your locality for local kyocera ink smudging repair:

Kyocera Ink Smudging Repair price in Santacruz — know it before you book

  1. 1Pick your device & issue
  2. 2See the real price range
  3. 3Free doorstep pickup in Santacruz

4.9 from 9,605 customer reviews across all repairs · upfront pricing · 90-day warranty

Before you book: have your device model and a quick description of the issue ready — it speeds up your quote.

Not sure what's wrong?

Find Your Fix by Symptom

Tell us what your device is doing — we'll point you to the right repair, with real pricing and next steps.

See all repair problems we fix

Nearest branch: Vile Parle

About 2.6 km from Santacruz in a straight line. With free doorstep pickup you don't need to travel — call or WhatsApp before you visit.

Book a repair

Kyocera Ink Smudging Repair — Book Now

Free pickup · Genuine parts · 90-day warranty

Booking received

We'll call you within 1 hour to confirm your appointment and arrange doorstep pickup.

Inspection fee: ₹350

  • Credited to your total repair cost if you go ahead.
  • Still applies if the device can't be repaired or you decline the repair.

+91

Device type *

Inspection fee: ₹350

  • If you go ahead with the repair, the ₹350 is credited to your total repair cost.
  • If the device can't be repaired or you decide not to continue, the ₹350 inspection fee still applies.

Your details are used only to arrange this repair. By submitting, you agree to our Privacy Policy.

Call WhatsApp