Skip to main content
Brother Brother · Printer Misaligned Output · Bhuleshwar

Brother Printer
Misaligned Output
in Bhuleshwar

Expert diagnosis & repair for Printer Misaligned Output on your Brother device in Bhuleshwar. Free doorstep pickup, genuine parts & 90-day warranty.

✓ ₹350 Inspection (refunded if you proceed with repair) ✓ Free Doorstep Pickup ✓ Same-Day Repair ✓ 90-Day Warranty ✓ All Brother Models

Open 9 AM – 9 PM · 7 days · ₹350 inspection fee (refunded if you proceed with repair)

Symptom Checker

Is Your Brother Device Showing These Signs?

Common symptoms of Printer Misaligned Output on Brother devices. Recognise 2 or more? Book a ₹350 inspection (refunded if you proceed with repair) now.

Laptop clearly shows signs of Printer Misaligned Output

Normal laptop performance significantly impacted

Issue worsening progressively with continued use

Standard user troubleshooting has not resolved it

Laptop has become unreliable for daily work

Risk of further hardware damage if left unaddressed

Don't Delay — Printer Misaligned Output Gets Worse Over Time

Unaddressed hardware issues worsen and can lead to secondary damage, escalating repair costs significantly.

Book Inspection (₹350)
Root Cause Analysis

Why Does Printer Misaligned Output Happen on Brother Devices?

Knowing the root cause ensures a precise repair — not just a temporary fix.

Physical Damage

Accidental drops, pressure or impact causing mechanical damage to internal components.

Liquid Exposure

Water, beverages or humidity causing short circuits or corrosion on circuit boards.

Normal Wear & Tear

Components degrade naturally with regular use — batteries, connectors and hinges most affected.

Manufacturing Defect

Factory faults that surface after the warranty period in certain production batches.

What Will It Cost to Fix?

Repair cost for Brother Printer Misaligned Output in Bhuleshwar depends on model and severity. We provide a free written estimate — no obligation.

Why Us?

Why Choose Xigox for Brother Printer Misaligned Output in Bhuleshwar?

With 1,00,026+ successful repairs and a 4.9-star rating, Xigox is an independent Brother repair specialist serving Bhuleshwar. Conveniently located near Bhuleshwar Market.

Component-Level Repairs

We repair Brother hardware at chip and board level where it's safe to do so — often a fraction of a full-module swap.

Experienced Technicians

Our engineers work on Brother hardware regularly. Every repair is tested before return.

Genuine & OEM-Grade Parts

We use genuine Brother parts wherever available; otherwise OEM-compatible components.

90-Day Parts Warranty

Every repair backed by a written 90-day warranty. Same fault recurs? We fix it free of charge.

Same-Day Turnaround

Most Brother Printer Misaligned Output jobs in Bhuleshwar are completed same-day. Urgent service available for critical cases.

Full Transparency

We quote before starting work. No hidden fees. You pay exactly what you were quoted.

1,00,026+
Repairs Completed

Since 2011

4.9 ★
Average Rating

9,727+ reviews

90 Days
Repair Warranty

Parts & labour

30 Min
Avg Response

For common issues

Free
Pickup & Drop

₹350 inspection fee

2011
Est. Since

15+ yrs in Mumbai City

Who repairs your device

Repaired in-house by Xigox technicians

Your Brother is handled by Xigox technicians from start to finish. It is never handed on to another shop. Work that needs the repair bench is done at our workshop in Virar West.

Board-level faults are traced with a microscope, a multimeter and a soldering station before any part is replaced, and parts are fitted only after you approve the quote.

We don't open your personal files during a repair. When a job needs access to your data, such as data recovery or a Windows reinstall, we ask you first.

  • Repaired in-house, not outsourced
  • Quote approved by you before work starts
  • Your files stay private
  • Microscope and board-level tools
  • Genuine or OEM-grade parts
  • 90-day warranty on repairs
Technician inspecting a laptop motherboard under a microscope at the repair bench Technician testing a laptop mainboard with a multimeter beside a Xigox-branded monitor Technician brushing dust off an opened laptop motherboard with a cleaning brush Technician inspecting a laptop motherboard under a microscope at the repair bench
Xigox technicians at the repair bench.
Our Process

How We Fix Brother Printer Misaligned Output

Step-by-step from booking to delivery — complete transparency, no surprises

01

Tell Us the Problem

Call, WhatsApp or book online. Tell us about the Printer Misaligned Output on your Brother printer in Bhuleshwar. No technical expertise needed.

02

Free Pickup & Drop

We pick up your Brother printer from your Bhuleshwar address at no transport cost. Bring it to us or we come to you.

03

₹350 Inspection

A Brother specialist examines your printer and identifies the exact root cause of the Printer Misaligned Output. Full written report provided — ₹350 fee refunded if you proceed with repair.

04

Transparent Quote

We share a detailed repair quote. Work begins only after your explicit approval — no hidden charges, no surprises.

05

Professional Repair

Our engineers fix the Printer Misaligned Output using OEM-grade Brother parts. A 12-point quality checklist is completed before your printer is returned.

06

90-Day Warranty + Delivery

Your Brother printer is returned to your Bhuleshwar address with a written 90-day warranty. Same fault recurs? We fix it free of charge.

Customer reviews

What Customers Say About Brother Printer Misaligned Output in Bhuleshwar

4.9/5 · 12 reviews shown

See all 9,727+ reviews

Brother DCP-T720DW — Printer Noise Fix

“Our Brother DCP-T720DW started making a grinding noise during printing. Xigox Virar found a worn gear in the paper feed mechanism and replaced it. Printer operates quietly and smoothly again. Quick, affordable fix.”
S Suhas Khedekar Naupada · 26 Feb 2025 29

Brother MFC-L2701DW — Printer Noise Fix

“Our Brother MFC-L2701DW started making a grinding noise during printing. Xigox Chembur found a worn gear in the paper feed mechanism and replaced it. Printer operates quietly and smoothly again. Quick, affordable fix.”
U Usha Limaye Mahalaxmi · 22 Aug 2025 45

Brother DCP-T220 — Printer Noise Fix

“Our Brother DCP-T220 started making a grinding noise during printing. Xigox Sion found a worn gear in the paper feed mechanism and replaced it. Printer operates quietly and smoothly again. Quick, affordable fix.”
A Alka Marathe Bhuleshwar · 5 Jan 2025 28

Brother DCP-T420W — General Printer Repair

“Our office Brother DCP-T420W was producing faded prints with streaks. Xigox Malad technician replaced the worn rollers and fuser element. Print quality is now factory-perfect. Sharp text and vibrant colours. Excellent on-site service.”
H Hrishikesh Lele Bhuleshwar · 12 Sep 2025 5

Brother DCP-T220 — New Printer Setup

“Needed our new Brother DCP-T220 connected to twelve office computers. Xigox Lower Parel configured network printing, scan-to-email, and installed drivers on every machine. Double-sided defaults set up too. Smooth and professional setup.”
T Tanvi Chaudhary Lower Parel · 8 Aug 2025 25

Brother DCP-T420W — Blank Pages Fix

“Our Brother DCP-T420W was feeding paper but printing blank pages only. Xigox Churchgate diagnosed a disconnected print head cable and reseated it properly. Full printing restored immediately. Quick diagnosis saved our deadline.”
A Ashish Shetty Churchgate · 5 Nov 2025 31
Page 1 / 2

← Swipe or tap dots to browse →

Repair examples

Recently Repaired Printers

View All Recent Repairs

Epson

L805

Fixed
Issue
Photo prints showing incorrect colors — skin tones appearing greenish. Color banding visible in gradient areas.
Solution
Performed nozzle check and deep cleaning. Ran ICM color profile calibration. Aligned print head for optimal dot placement.

Technician's note

Light cyan channel was partially blocked. After 3 cleaning cycles and manual alignment, color accuracy restored to factory spec.

Dadar West 2.5 Hours
  • Epson
  • Photo Printer
  • Color Calibration

Canon

imageCLASS LBP226dw

Fixed
Issue
Printer showing "Toner Low" despite new toner cartridge installed. Print density extremely light.
Solution
Cleaned toner level sensor window inside printer. Reset toner counter. Replaced faulty toner sensor board.

Technician's note

Toner dust had coated the optical sensor, giving false low readings. Sensor board had corroded connector pin.

Goregaon East 2 Hours
  • Canon
  • Laser
  • Toner Sensor

Samsung

Xpress M2835DW

Fixed
Issue
Vertical black lines appearing on every printed page. Print quality deteriorating with ghost images visible.
Solution
Replaced worn imaging drum unit. Cleaned corona wire and transfer roller. Ran diagnostic print to confirm clean output.

Technician's note

Drum surface had scratches causing line defects. Drum at 150%% of rated life — impressive longevity.

Thane West 1.5 Hours
  • Samsung
  • Laser
  • Drum Replacement

HP

DeskJet 2723

Fixed
Issue
Showing "Cartridge Problem" error after installing new cartridges. Printer refusing to print. Orange error light blinking.
Solution
Cleaned cartridge contacts with isopropyl alcohol. Reseated cartridges with proper alignment. Updated printer firmware to recognize new cart...

Technician's note

Oxidation on carriage contacts was causing intermittent connection. Genuine HP cartridges verified.

Powai 30 Minutes
  • HP
  • Cartridge
  • DeskJet

Epson

L3252

Fixed
Issue
Printer not connecting to Wi-Fi network. Wi-Fi Direct not functioning. Mobile printing completely non-operational.
Solution
Updated printer firmware to latest version. Reset network settings and reconfigured Wi-Fi with WPA3 protocol. Tested wireless printing from...

Technician's note

Old firmware had known Wi-Fi bug. Post-update, connection stable at 5GHz band.

Bandra West 45 Minutes
  • Epson
  • Wi-Fi
  • Wireless Printing

Canon

PIXMA G3010

Fixed
Issue
Paper jamming every 3-4 pages. Multiple sheets feeding simultaneously. Grinding noise during paper pickup.
Solution
Replaced worn paper pickup rollers and separation pad. Cleaned dust from feed mechanism. Calibrated paper tray alignment.

Technician's note

Pickup rollers had glazed surface from high humidity. Used genuine Canon rollers for best grip.

Malad West 1.5 Hours
  • Canon
  • Paper Jam
  • Roller Replacement

FAQ

FAQs — Brother Printer Misaligned Output in Bhuleshwar

Everything you need to know before booking your inspection

10 questions answered

Every repair at Xigox — including Brother Printer Misaligned Output fixes — is covered by a 90-day warranty. If the same problem recurs within 90 days, we repair it free of charge. Our warranty is provided in writing and applies to all repairs across Bhuleshwar and Mumbai MMR. Free pickup also available in Null Bazaar, Kalbadevi, Bhendi Bazaar and surrounding areas.
The cost to fix Brother Printer Misaligned Output in Bhuleshwar varies by printer model and severity. Xigox charges ₹350 for inspection — refunded if you proceed with the repair. A transparent written quote before any work begins. You're never charged until you approve the repair — no hidden fees, ever. We also serve Null Bazaar, Kalbadevi, Bhendi Bazaar, so you can recommend us to neighbours too.
Xigox repairs Brother Printer Misaligned Output on HP, Canon, Epson, Brother, Samsung, Ricoh and Kyocera, and more. Our engineers are trained on brand-specific procedures and we stock genuine-grade parts for the most common models, so most repairs in Bhuleshwar are completed the same day. Our service covers the full 400004 postal area in Bhuleshwar.
It depends on the age and value of the printer. As a rule, if the repair costs less than a third of a comparable replacement and the rest of the hardware is healthy, repairing is worth it. After the inspection we tell you the honest repair cost and what a replacement would run, so the comparison is yours to make — we do not push a repair that is not worth doing. Trusted by customers throughout Mumbai City — rated 4.9★ across 9,727+ reviews.
No. For any printer that still powers on we take a full backup before touching the hardware, and for units that do not, we attempt recovery before repair. Your data is never accessed beyond what the repair requires, and nothing is copied off-site. Trusted by customers throughout Mumbai City — rated 4.9★ across 9,727+ reviews.
For part replacements our technician works at your address in Bhuleshwar. Brother Printer Misaligned Output that traces back to the board needs microscope and hot-air rework, so that job comes to the lab — with free pickup and drop either way. We tell you which category yours is before you commit. We also serve Null Bazaar, Kalbadevi, Bhendi Bazaar, so you can recommend us to neighbours too.
You bring it straight back. The same fault inside 90 days is covered under warranty — no second inspection fee, no diagnostic charge, no argument. The cover is there in writing so you do not have to just take our word for it. Free pickup also available in Null Bazaar, Kalbadevi, Bhendi Bazaar and surrounding areas.
We use OEM or OEM-grade components and tell you which one your quote covers before work starts. We do not fit unbranded aftermarket parts or recycled pulls sold as new — part quality is the single biggest factor in whether a printer repair lasts, so it is not somewhere we cut cost. Free pickup also available in Null Bazaar, Kalbadevi, Bhendi Bazaar and surrounding areas.
That is what the ₹350 inspection is for. Symptoms overlap constantly — the same visible behaviour can come from three different components. We test rather than guess, then show you what we found before quoting. If the actual fault turns out to be something cheaper, the quote reflects that. Free pickup also available in Null Bazaar, Kalbadevi, Bhendi Bazaar and surrounding areas.
Usually not for long. Left alone, most faults of this kind put stress on neighbouring components and turn a contained repair into a board-level one. If you cannot bring it in immediately, tell us the symptoms on WhatsApp and we will tell you honestly whether it can wait a few days or should be powered down now. We also serve Null Bazaar, Kalbadevi, Bhendi Bazaar, so you can recommend us to neighbours too.

Still have questions?

Send us your question on WhatsApp or call — a technician will answer.

Brother Printer Repair in Bhuleshwar — Xigox

If you are looking for Brother Printer repair in Bhuleshwar that is not a brand service centre, this is it. Xigox has run an independent Brother bench since 2011, and our technicians work on Brother boards and firmware every day rather than treating them as an occasional job. More than 1,00,000 repairs and a 4.9-star average rating sit behind that.

Parts for Brother Printer models are held in stock rather than ordered after you book, so most repairs are not waiting on a supplier. Screens, batteries, keyboards, charging boards and flex cables are all OEM-grade. You approve a written estimate first, and the ₹350 inspection is credited back against the repair.

We actively serve the entire 400004 postal area within Mumbai City district, ensuring same-day response for every repair request. ₹350 inspection fee (refunded if you proceed with repair). Located near Bhuleshwar Market, our service coverage extends across Bhuleshwar and all surrounding localities. In addition to Bhuleshwar, we also provide doorstep repairs and free pickup for lab work for customers in Null Bazaar, Kalbadevi, Bhendi Bazaar and other nearby areas.

How your Brother Printer gets serviced depends on the fault. Part swaps happen on-site anywhere in Bhuleshwar; board-level work goes to the bench because it needs proper rework equipment. Either way collection and return are free, and you get progress updates rather than having to chase us.

We back Brother work with a 90-day parts-and-labour warranty in writing, not just a verbal promise. If your Printer does come back with the same fault, we cover it. You keep a direct WhatsApp line to the team that did the work.

Service Hours

Monday – Sunday · 9 AM – 9 PM

Open on all public holidays

Service Area

Bhuleshwar & surrounding Mumbai areas

Doorstep repairs + free pickup for lab work

Contact Us

+91 74997 61196

info@xigox.com

Our Guarantee

90-day warranty on all repairs

Free re-repair if same fault recurs

Product lines

Brother Series We Cover for Printer Misaligned Output repair in Bhuleshwar

Our bench covers 3 distinct Brother series. That matters for Printer Misaligned Output repair, because a DCP and a HL are stripped down very differently. We regularly take in DCP, HL and MFC units for Printer Misaligned Output repair in Bhuleshwar. Specific Brother models on our current service list include Brother DCP-T220, Brother DCP-T420W, Brother DCP-T720DW and Brother HL-B2080DW. If your Brother model is not listed, it is almost certainly still covered — send us the model number on the base sticker and we will confirm parts availability before you book.

  • DCP
  • HL
  • MFC

Brother DCP

The Brother DCP is part of Brother's DCP series — Brother's multifunction (print/scan/copy, no fax) printer line for home and small-office use.

Worth knowing for this repair: Multifunction print/scan/copy in a single unit, without a dedicated fax line.

Brother DCP-T220 Brother DCP-T420W Brother DCP-T720DW

Brother HL

The Brother HL is part of Brother's HL series — Brother's dedicated (print-only) laser printer line, built for straightforward, reliable document printing.

Worth knowing for this repair: Print-only (no scan/copy) — a simpler, more focused device than Brother's multifunction lines.

Brother HL-B2080DW Brother HL-L2321D

Brother MFC

The Brother MFC-L2701DW is part of Brother's MFC series — Brother's full multifunction printer line including fax capability alongside print/scan/copy, aimed at small-office use.

Worth knowing for this repair: Full multifunction set including fax, beyond the DCP series' print/scan/copy.

Brother MFC-L2701DW

Printer Misaligned Output Repair for All Brother Models in Bhuleshwar

Select your specific Brother model for a more targeted diagnosis page

Printer Misaligned Output Repair for Other Brands in Bhuleshwar

We fix Printer Misaligned Output across all major laptop and computer brands with the same quality and warranty

Areas, Roads & Landmarks We Cover in Bhuleshwar

Free pickup & drop across all these neighbourhoods

Localities & neighbourhoods

  • Kalbadevi
  • Zaveri Bazaar
  • Lohar Chawl

Roads & highways

  • Sheikh Memon Street
  • V P Road

Landmarks & famous places

  • Bhuleshwar Market
  • Mumba Devi Temple

Brother Printer Misaligned Output Repair — All Locations

Explore more services

More Repair & Tech Services Near Bhuleshwar

Same technicians · Free pickup · 90-day warranty across all services.

₹350 Inspection (refunded if you proceed with repair) · 1,00,000+ Repairs · 4.9 ★ · 90-Day Warranty

Fix Your Brother Device's
Printer Misaligned Output Today

₹350 Inspection (refunded if you proceed with repair) · Expert repair for Printer Misaligned Output · 90-day warranty

Serving Bhuleshwar and all of Mumbai MMR · Open 9 AM – 9 PM daily

Comparison

Xigox vs Other Brother Printer Misaligned Output Shops in Bhuleshwar

What you get with Xigox in Bhuleshwar, side by side.

FeatureXigoxOther shops
Experienced Technicians Trained & VerifiedVaries; ask who will work on the device
Genuine / OEM Parts OEM-Quality PartsVaries; ask which part will be fitted
90-Day Warranty Written CertificateVaries; ask for the warranty in writing
Diagnosis / Inspection ₹350, credited to the repairVaries; ask what the diagnosis costs
Same-Day Turnaround Bhuleshwar — Most RepairsVaries; ask for a time in writing
Free Doorstep Pickup Bhuleshwar — FreeVaries; ask whether pickup is free
Transparent Pricing Written Quote FirstVaries; ask for a written quote first
Live WhatsApp Updates Real-time Repair StatusVaries; ask how you will get updates

Xigox charges ₹350 for inspection — credited to your repair cost if you go ahead.

Brother Printer Misaligned Output Repair in Bhuleshwar — Professional, Reliable, and Affordable

Don't waste time on booking portals. Reach the engineers directly with Xigox. Print nozzle blockages are the #1 reason for blank lines, colour gaps, and faded output — and new heads are rarely needed. Xigox's printer team uses professional cleaning equipment to clear blockages for HP Deskjet, Canon PIXMA, Epson EcoTank, and Brother. Most Brother Printer Misaligned Output Repair jobs in Bhuleshwar restores full print quality without parts cost.

Data Security During Brother Printer Misaligned Output Repair

Your personal data is our top priority during your issue. Customers throughout Bhuleshwar trust us because we never access personal files. Throughout the issue, your confidential files remain untouched. If a software reset is necessary, we consult you beforehand.

Transparent Inspection in Bhuleshwar

Uncertain about the issue with your Brother? Prior to starting any repair, Xigox performs a thorough diagnostic check. The ₹350 inspection fee, it is 100% refunded if you proceed with the repair. Our local experts will show you the broken part in plain English so you can make an informed decision.

Fixed-Quote Policy for Brother Printer Misaligned Output Repair

One of the most common complaints about repair shops in Bhuleshwar is hidden charges after the job is done. Xigox operates differently. Prior to touching your Brother, our technician shares a written quote covering parts and labour. There is zero ambiguity — the decision is entirely yours. The ₹350 diagnostic is credited 100% when you approve the repair.

Genuine Parts for Brother Printer Misaligned Output Repair

Reliability matters for the repair. That's why our technicians exclusively use original-specification parts for your Brother. Rather than counterfeit components, we source from established suppliers. This ensures your repair is durable, backed by our written 90-day warranty.

Top-Rated Brother Printer Misaligned Output Repair in Bhuleshwar

You have options in Bhuleshwar, but Xigox is the preferred choice for this issue. Our core values include 100% upfront pricing. Every issue starts with a detailed hardware check costing just ₹350, refunded if you proceed. No hidden charges — just professional issue in Bhuleshwar.

Pickup & Drop Across Bhuleshwar

Customers from Bhuleshwar with free pickup and drop. Every job gets a written quote before any work, genuine parts and a 90-day warranty, whether it is one laptop or an office fleet. By trusting us for the repair in Bhuleshwar, your device is repaired at our Virar West workshop and returned tested.

Warranty & After-Service for Brother Printer Misaligned Output Repair

All this issue performed by Xigox in Bhuleshwar comes with a written 90-day warranty covering parts and labour. Simply put, if the same issue recurs within 90 days, we redo it completely free. Xigox issues a printed warranty receipt every single time, so you know exactly what is covered.

Trained Technicians for Brother Printer Misaligned Output Repair in Bhuleshwar

Not everyone in Bhuleshwar can handle complex the repair. Xigox's engineers work on Brother hardware every day specifically for Brother hardware. Whether it's a minor fix or advanced component-level motherboard repair, we fix it properly right here for Bhuleshwar clients.

Convenient Collection across Bhuleshwar

Traveling across town in Bhuleshwar can be a nightmare. That's why Xigox has built a straightforward pickup and delivery network for this issue. Simply share your Bhuleshwar address, and our technician will pick up the Brother from your home or office. After the issue is completed, it is delivered back fully tested and sealed. Save your time without leaving your desk.

Emergency Brother Printer Misaligned Output Repair Now

Need your Brother fixed urgently? Xigox offers priority the repair in Bhuleshwar for critical situations. From an exam deadline and your Brother just crashed, our emergency service ensures your Brother is repaired within the same business day. Emergency the repair can be arranged including weekends in Bhuleshwar. Just say 'priority' when calling and our team will fast-track your repair immediately.

Don't let a broken Brother slow you down in Bhuleshwar. Call Xigox right now to schedule your Brother Printer Misaligned Output Repair. With our 90-day warranty and upfront pricing, your Brother is in safe hands. Schedule your free pickup in Bhuleshwar online now.

Service area

Brother Printer Misaligned Output Repair in Bhuleshwar — Service Area & Coverage

Xigox provides brother printer misaligned output repair across Bhuleshwar (PIN 400004), in the Mumbai City district of Mumbai. Our doorstep pickup and on-site service cover the entire Bhuleshwar area and the neighbourhoods around it.

Localities we cover in Bhuleshwar: Kalbadevi, Zaveri Bazaar, Lohar Chawl. Wherever you are in Bhuleshwar, we can collect your device from your door and bring it back after the repair.

Our technicians regularly serve homes, societies and offices around Bhuleshwar Market and Mumba Devi Temple, and along Sheikh Memon Street and V P Road. If you're near any of these landmarks, same-day pickup for brother printer misaligned output repair is almost always available.

Brother Printer Misaligned Output Repair near Bhuleshwar

We also serve these nearby areas — tap your locality for local brother printer misaligned output repair:

Brother Printer Misaligned Output Repair price in Bhuleshwar — know it before you book

  1. 1Pick your device & issue
  2. 2See the real price range
  3. 3Free doorstep pickup in Bhuleshwar

4.9 from 9,727 customer reviews across all repairs · upfront pricing · 90-day warranty

Before you book: have your device model and a quick description of the issue ready — it speeds up your quote.

Not sure what's wrong?

Find Your Fix by Symptom

Tell us what your device is doing — we'll point you to the right repair, with real pricing and next steps.

See all repair problems we fix

Nearest pickup point: Worli, Dadar

~7 km from Bhuleshwar. With free doorstep pickup you don't need to travel — this is our nearest pickup point.

Book a repair

Brother Printer Misaligned Output Repair — Book Now

Free pickup · Genuine parts · 90-day warranty

Booking received

We'll call you within 1 hour to confirm your appointment and arrange doorstep pickup.

Inspection fee: ₹350

  • Credited to your total repair cost if you go ahead.
  • Still applies if the device can't be repaired or you decline the repair.

+91

Device type *

Inspection fee: ₹350

  • If you go ahead with the repair, the ₹350 is credited to your total repair cost.
  • If the device can't be repaired or you decide not to continue, the ₹350 inspection fee still applies.

Your details are used only to arrange this repair. By submitting, you agree to our Privacy Policy.

Call WhatsApp